ECU (Engine Control Unit) is the core component of modern automobile engine control system. It is responsible for monitoring and controlling Engine operating conditions to ensure the engine is running at its best. Breathable products can be used as important components of ECUs in automobiles for the following reasons:

1. Protect the ECU from the external environment: Breathable products can prevent water, dust, and grease from accumulating inside the ECU and other impurities enter, thus protecting the ECU from the external environment.
2. Improve the heat dissipation effect of the ECU: Breathable products can allow air circulation inside the ECU and enhance the heat dissipation capacity of the ECU. , maintain a stable operating temperature of the ECU and improve the reliability of the ECU.
3. Prevent moisture inside the ECU: Breathable products can allow moisture inside the ECU to be discharged in time to prevent the ECU from Excess moisture inside causes short circuit or circuit aging.
4. Enhance the protective capabilities of the ECU: Breathable products can increase the waterproof and dustproof capabilities of the ECU, effectively reducing ECU failure rate.

In summary, Spade breathable products can be used as important components of the ECU to protect the ECU from the impact of the external environment, improve the heat dissipation effect and protection capabilities of the ECU, ensure the reliable operation of the ECU, thereby improving the performance of the vehicle. performance and security.

In-car electronic equipment: Navigation system, display system, communication controller

Compared with the working environment of automobile exterior, chassis, engine compartment and interior parts, the working environment is not so “harsh”. With the development of automobile smart cockpits, autonomous driving, and automobile Internet, the number and sophistication of electronic devices in the car are increasing, and the in-car voice interaction system will also contain a large number of microphones and speakers. Different parts of audio equipment have different protection requirements. For example, the main control panel in the car needs a breathable membrane to balance the pressure difference and a dust-proof and sound-permeable membrane to transmit sound. The car tail cover needs to be equipped with a waterproof and breathable membrane. Failure of electronic equipment in the car will also lead to serious consequences. To improve the reliability of electronic equipment in the car, installing breathable products is an economical and effective solution.

Breathable products can be used as important components in cars to protect electronic equipment in the car. Their main functions are as follows:

The application of waterproof and breathable valves in inverters has the following features and advantages:

1. Prevent internal moisture accumulation:The inverter will generate heat and moisture during operation. If it is not properly vented, it will cause moisture to accumulate inside, which will affect the normal operation of electronic components. The waterproof and breathable valve can effectively discharge internal moisture and maintain a dry environment inside the inverter.
2. Protect electronic components:The electronic components in the inverter are very sensitive to humidity. Excessive humidity It can damage the performance of components or even cause failure. The waterproof and breathable valve can prevent moisture from entering the inside of the inverter, effectively protect electronic components, and improve the reliability and stability of the equipment.
3. Prevent dust and pollution:Inverters are usually installed outdoors or in places with serious pollution. Susceptible to the intrusion of dust, particles and other contaminants. The waterproof and breathable valve can prevent these contaminants from entering the inside of the inverter and keep the equipment clean and running normally.
4. Improve the heat dissipation effect:The inverter will generate a large amount of heat during operation. If it cannot Timely dissipation of heat will cause the temperature to be too high, affecting the performance and life of the inverter. The waterproof and breathable valve can effectively discharge internal heat, provide good heat dissipation effect, and maintain the normal operating temperature of the inverter.

In short, the application of waterproof and breathable valves in inverters can effectively protect electronic components, improve the reliability and stability of the equipment, while maintaining a dry and clean environment inside the inverter, extending the equipment life service life.

The application of waterproof and breathable valves in outdoor LED lights has the following features and advantages:

1. Waterproof and dustproof:Outdoor LED lights often face harsh weather conditions such as rain and sand, and are susceptible to moisture and the intrusion of dust, thus affecting the normal operation of the lamps. The waterproof and breathable valve can effectively prevent moisture and dust from entering the interior of the lamp and protect the lamp components from damage.

2. Breathable and heat dissipation: LED lights will generate a certain amount of heat when working for a long time. If the internal heat cannot be dissipated in time, it will The temperature rise affects the life and brightness of the lamp. The waterproof and breathable valve can effectively discharge internal heat, provide good heat dissipation effect, and help maintain the stable performance and long-term reliable operation of LED lights.

3. Increase the life of the lamp: The waterproof breathable valve can maintain a dry environment inside the lamp and prevent accumulation of moisture that may cause corrosion. and damage, thereby extending the service life of the LED lamp.

4. Strong environmental adaptability: Outdoor LED lights need to have strong environmental adaptability, and the waterproof and breathable valve has Good sealing and weather resistance, suitable for various harsh outdoor environments.

To sum up,The application of waterproof and breathable valves in outdoor LED lights can effectively protect internal components, improve heat dissipation, extend the life of the lamp, and adapt to various harsh outdoor environments. It is an important way to improve LED lighting. An important component of lamp stability and reliability.

The application of waterproof and breathable products in photovoltaic systems is to improve the overall performance and reliability of the system, especially under outdoor installation conditions, to effectively cope with various environmental challenges. For photovoltaic controllers, the addition of these products has an important impact:
Sealing protection: Waterproof and breathable valve products can ensure that photovoltaic controllers maintain good sealing under changing climate conditions performance, preventing the intrusion of moisture, dust and harmful substances, thereby protecting the internal circuit from damage.
Breathability: This type of product can also allow the photovoltaic controller to achieve natural ventilation when working, preventing internal and external Condensation problems caused by pressure differences ensure the normal operation of the equipment.
Extended lifespan:Effective waterproofing and dustproofing can reduce equipment failures caused by environmental factors, thereby improving The service life of photovoltaic controller.
Stability: In outdoor environments, especially at the seaside or in areas with high salt content, waterproof and breathable products can reduce Salt spray and other corrosive effects on electronic components keep the photovoltaic controller in a stable working state.
Thermal Management: Since photovoltaic systems generate heat during operation, breathable products help to dissipate heat. Prevent heat build-up from affecting controller performance.
Easy installation:Different waterproof and breathable product forms (such as threaded type, embedded type, welded membrane, etc.) can Adapt to various housing designs and provide flexible installation methods for photovoltaic controllers.
In general,The impact of waterproof and breathable products on photovoltaic controllers is mainly reflected in improving the protection level of the equipment, ensuring its normal operation in harsh environments, extending its service life, and improving the overall system performance and reliability.