In-car electronic equipment: Navigation system, display system, communication controller

Compared with the working environment of automobile exterior, chassis, engine compartment and interior parts, the working environment is not so “harsh”. With the development of automobile smart cockpits, autonomous driving, and automobile Internet, the number and sophistication of electronic devices in the car are increasing, and the in-car voice interaction system will also contain a large number of microphones and speakers. Different parts of audio equipment have different protection requirements. For example, the main control panel in the car needs a breathable membrane to balance the pressure difference and a dust-proof and sound-permeable membrane to transmit sound. The car tail cover needs to be equipped with a waterproof and breathable membrane. Failure of electronic equipment in the car will also lead to serious consequences. To improve the reliability of electronic equipment in the car, installing breathable products is an economical and effective solution.

Breathable products can be used as important components in cars to protect electronic equipment in the car. Their main functions are as follows:

The application of Metal Srew-In breathable vent in inverters has the following features and advantages:

1. Prevent internal moisture accumulation:The inverter will generate heat and moisture during operation. If it is not properly vented, it will cause moisture to accumulate inside, which will affect the normal operation of electronic components. The Metal Srew-In breathable vent can effectively discharge internal moisture and maintain a dry environment inside the inverter.
2. Protect electronic components:The electronic components in the inverter are very sensitive to humidity. Excessive humidity It can damage the performance of components or even cause failure. The waterproof and breathable valve can prevent moisture from entering the inside of the inverter, effectively protect electronic components, and improve the reliability and stability of the equipment.
3. Prevent dust and pollution:Inverters are usually installed outdoors or in places with serious pollution. Susceptible to the intrusion of dust, particles and other contaminants. The waterproof and breathable valve can prevent these contaminants from entering the inside of the inverter and keep the equipment clean and running normally.
4. Improve the heat dissipation effect:The inverter will generate a large amount of heat during operation. If it cannot Timely dissipation of heat will cause the temperature to be too high, affecting the performance and life of the inverter. The waterproof and breathable valve can effectively discharge internal heat, provide good heat dissipation effect, and maintain the normal operating temperature of the inverter.

In short, the application of vent valves in inverters can effectively protect electronic components, improve the reliability and stability of the equipment, while maintaining a dry and clean environment inside the inverter, extending the equipment life service life.

The application of vent valves in outdoor LED lights has the following features and advantages:

1. Waterproof and dustproof:Outdoor LED lights often face harsh weather conditions such as rain and sand, and are susceptible to moisture and the intrusion of dust, thus affecting the normal operation of the lamps. The waterproof and breathable valve can effectively prevent moisture and dust from entering the interior of the lamp and protect the lamp components from damage.

2. Breathable and heat dissipation: LED lights will generate a certain amount of heat when working for a long time. If the internal heat cannot be dissipated in time, it will The temperature rise affects the life and brightness of the lamp. The waterproof and breathable valve can effectively discharge internal heat, provide good heat dissipation effect, and help maintain the stable performance and long-term reliable operation of LED lights.

3. Increase the life of the lamp: The waterproof breathable valve can maintain a dry environment inside the lamp and prevent accumulation of moisture that may cause corrosion. and damage, thereby extending the service life of the LED lamp.

4. Strong environmental adaptability: Outdoor LED lights need to have strong environmental adaptability, and the waterproof and breathable valve has Good sealing and weather resistance, suitable for various harsh outdoor environments.

To sum up,The application of vent valves in outdoor LED lights can effectively protect internal components, improve heat dissipation, extend the life of the lamp, and adapt to various harsh outdoor environments. It is an important way to improve LED lighting. An important component of lamp stability and reliability.

The application of vent valves in energy storage cabinets also has certain characteristics and advantages:

1. Prevent moisture accumulation inside: Energy storage cabinets usually store large-capacity batteries or electronic components. Working over time generates heat, and without proper ventilation and dehumidification, moisture can easily accumulate inside. The waterproof and breathable valve can effectively discharge internal moisture, maintain a dry environment inside the energy storage cabinet, and prevent corrosion and damage to batteries and electronic components.

2. Protect electronic components: The electronic components inside the energy storage cabinet are very sensitive to humidity and temperature. Humidity and temperature can affect its performance and lifespan. The waterproof and breathable valve can prevent moisture from entering the interior of the energy storage cabinet, protect electronic components from damage, and improve the reliability and stability of the equipment.

3. Prevent dust and pollution: Energy storage cabinets are usually installed outdoors or in industrial environments, and are susceptible to dust, Intrusion of particulate matter and other pollutants. The waterproof and breathable valve can prevent these pollutants from entering the interior of the energy storage cabinet and keep the equipment clean and operating normally.

4. Improve the heat dissipation effect: The batteries or electronic components inside the energy storage cabinet will generate a lot of heat when working for a long time. , the waterproof and breathable valve can effectively discharge the internal heat, provide good heat dissipation effect, and maintain the normal operating temperature of the energy storage cabinet.

Therefore, applying vent valves to energy storage cabinets can not only protect internal components and improve the reliability and stability of the equipment, but also extend the service life of the equipment and keep it dry and clean. internal environment.

The application of vent valves in 5G base stations also has certain characteristics and advantages:

Waterproof: Communication base station equipment usually needs to resist rain, splashing water and other moisture intrusions. Waterproof and breathable products can provide Effective protection to prevent moisture from causing circuit short circuit or equipment damage.

Breathability: The equipment will generate heat during operation. Waterproof and breathable products can help dissipate this heat and prevent the equipment from overheating to ensure normal operation of the equipment.

Dust resistance:Dust and particles in outdoor environments may clog the device’s cooling holes and affect its normal operation. . Waterproof and breathable products can effectively prevent the entry of these particles and protect equipment from dust pollution.

Weather resistance: Communication base station equipment needs to be able to withstand various climatic conditions, including ultraviolet rays, temperature differences, salt spray, etc. Waterproof and breathable products are usually weather-resistant and can ensure the normal operation of equipment in extreme climates.

Sealing: Waterproof and breathable products can provide good sealing performance to prevent moisture and dust from entering the seams and joints of the equipment. interface to ensure the protective performance of the entire machine.

Balance pressure: In some designs, waterproof and breathable products can help balance internal and external pressure to prevent equipment is damaged.

Reliability: Waterproof and breathable products improve the reliability of communication base station equipment in harsh environments and reduce equipment failures and downtime to ensure the continuous operation of the communication system.

Maintainability: Due to the use of waterproof and breathable products, the maintenance workload of communication base stations is reduced because they are resistant to the outside world Environmental impact, reducing breakdowns and damage.

Pressure resistance:Waterproof and breathable products can withstand a certain amount of water pressure, ensuring the safety of equipment under a certain water depth and pressure. normal operation.

Cost-Effectiveness:While waterproof and breathable products may add to the initial cost of the device, they provide long-term protection and Performance is guaranteed, thereby reducing overall life cycle costs.

In summary, waterproof and breathable products are crucial to the performance and reliability of communication base station equipment in outdoor environments. They ensure that the equipment can operate stably in various environments, thereby ensuring The stability and reliability of communication networks.