Breathable products have the following two main impacts on mobile phones:

1. Ventilation and heat dissipation: Mobile phones using breathable products can allow the heat inside the phone to be discharged more easily, thus Reduce the problem of mobile phone heating. The design of breathable products can increase the ventilation performance of the mobile phone, promote air circulation, and reduce the heat remaining inside the mobile phone. It can not only improve the stability and work efficiency of the mobile phone, but also extend the service life of the mobile phone.
2. Waterproof and dustproof:Breathable products are usually also waterproof and dustproof, which can effectively prevent rainwater , dust and other substances enter the inside of the mobile phone. This can protect the electronic components inside the mobile phone from damage and enable the mobile phone to be used in harsh environments, such as outdoor sports, travel, etc.

In short, breathable products can improve the ventilation, heat dissipation, waterproof and dustproof capabilities of mobile phones, thereby increasing the service life and reliability of mobile phones. At the same time, it also provides mobile phone users with a more comfortable and safe experience.

Related products of SST include: Adhesive Vent membrane , Speaker waterproof and breathable Sound membrane, Microphone waterproof sound-permeable membrane

The impact of breathable products on smart wearable devices is mainly reflected in the following aspects:

1. Comfort: Smart wearable devices are worn close to the body, such as smart bracelets, smart watches, etc., breathable The product allows the skin to breathe better, reduces discomfort caused by long-term wearing, and improves wearing comfort.
2. Anti-sweat: Breathable products can effectively discharge sweat, keep the skin dry and avoid sweat damage to the equipment. damage, while also reducing the possibility of bacterial growth, which is beneficial to keeping the equipment clean and the wearer healthy.
3. Protect electronic components: If the breathable product is properly designed, it can prevent dust, water vapor, etc. to a certain extent Getting inside the device helps protect the device’s electronic components and extend the device’s service life.
4. Adapt to diverse sports scenarios: For sports-oriented smart wearable devices, breathable products can provide good Excellent breathability, adaptable to wearing needs in various sports scenarios, such as running, cycling, etc.

Therefore, breathable products can have a positive impact on the comfort, protection and adaptability of smart wearable devices, improving user experience and product reliability.

Related products of SST include: Adhesive Vent membrane , Speaker waterproof and breathable Sound membrane, Microphone waterproof sound-permeable membrane

The impact of waterproof, breathable and sound-permeable products on MEMS (Microelectromechanical Systems) microphones is significant because they combine waterproof, breathable and sound transmission characteristics to adapt to various environments and improve the overall performance of the product. The following are the possible effects of waterproof, breathable and sound-permeable products on MEMS microphones:

Improve waterproof performance: MEMS microphones are usually very small and highly sensitive, easily affected by moisture. Waterproof, breathable, and sound-permeable products can provide protection for microphones, allowing them to function properly underwater or in high-humidity environments.

Enhanced Breathability: Breathability is critical to preventing water accumulation and corrosion inside the microphone. Waterproof, breathable, and sound-permeable products maintain the breathability of the microphone by allowing gas exchange while preventing moisture from entering.

Improve sound quality: Waterproof, breathable, and sound-permeable products generally have high sound transmission efficiency, which means that even Even though it’s waterproof, the microphone captures and transmits high-quality sound.

Dust and Contamination Protection: Acoustically transparent products prevent dust and other contaminants from entering the microphone, reducing malfunctions and Maintenance needs.

Improved durability: Waterproof, breathable, and acoustically transparent products can increase the durability of your microphone by providing an extra layer of protection. Enable it to continue working in harsh environments.

Adapt to different applications:Different applications may require different levels of waterproofing and breathability. Waterproof, breathable and sound-permeable products can be customized according to specific needs to adapt to various usage scenarios.

Heat dissipation performance: The microphone will generate heat when working. Waterproof, breathable and sound-permeable products can help dissipate heat and keep the microphone Optimum operating temperature.

Reduce failure rate:In extreme environments, such as outdoor sports or industrial sites, waterproof, breathable and sound-permeable products can reduce Microphone failure caused by moisture and dust.

In general, waterproof, breathable, and sound-permeable products are crucial for MEMS microphones because they not only provide physical protection, but also ensure the quality and efficiency of sound transmission. The design and material selection of these products are critical to achieving optimal waterproofing, breathability and sound transmission performance.

Related products of SST include: Adhesive Vent membrane , Speaker waterproof and breathable Sound membrane, Microphone waterproof sound-permeable membrane

Breathable and sound-permeable products may have the following effects on walkie-talkies:

1. Call quality: Breathable and sound-permeable products can provide good call quality. Its design and application maintains air circulation inside the radio to prevent sound from being blocked or attenuated, ensuring clear voice transmission.
2. Noise control: Breathable and sound-permeable products can help walkie-talkies reduce interference from external noise. Through the breathability performance, a suitable air pressure balance can be established between the inside of the walkie-talkie package and the external environment, reducing the penetration of noise and improving the clarity of calls.
3. Dust-proof and moisture-proof:Breathable and sound-permeable products can prevent the accumulation of dust and moisture inside the walkie-talkie packaging, protecting The internal components of the radio are functioning properly. The breathable performance can balance the humidity inside and outside the package, prevent moisture from entering the inside of the walkie-talkie, and reduce the risk of the walkie-talkie getting damp.
4. Improve durability: The application of breathable and sound-permeable products can improve the durability of the walkie-talkie. By controlling the air pressure difference inside and outside the package, the breathable and sound-permeable performance can reduce the deformation and damage of the walkie-talkie package and extend its service life.

In summary,The application of breathable and sound-permeable products in walkie-talkies can provide good call quality, control noise, prevent dust and moisture, and improve the durability of walkie-talkies. These effects help ensure the normal operation and long-term use of the radio.

Related products of SST include: Adhesive Vent membrane , Speaker waterproof and breathable Sound membrane, Microphone waterproof sound-permeable membrane

Waterproof, breathable and sound-permeable products are mainly designed for electronic equipment to provide waterproof, dustproof, heat dissipation and other functions, and to ensure the quality of sound transmission. These characteristics are equally important for electronic products such as scanners, although scanners are not at risk of water intrusion as frequently as smartphones or cameras. The following are the possible effects of waterproof, breathable and sound-permeable products on the scanner:

Improved protective performance: The waterproof, breathable and sound-permeable membrane can effectively prevent moisture and dust from entering the interior of the scanner and protect the internal Sensors and electronic components are protected from damage, increasing the overall durability of the scanner.

Improved heat dissipation performance: The scanner will generate heat when it is running. Waterproof, breathable and sound-permeable products can help dissipate the heat. Avoid device overheating, thereby increasing scanning efficiency and extending device life.

Sound quality assurance:If the scanner has a sound output function, the waterproof, breathable and sound-permeable membrane can ensure clear sound transmission degree to prevent damage to sound quality due to moisture intrusion.

Increased dustproof level:In dusty environments, the waterproof, breathable and sound-permeable membrane can prevent dust particles from entering the scanner Internally, reduce failure rate.

Adapt to different environments:In some special environments, such as medical, outdoor or industrial settings, the scanner may Facing more waterproof and dustproof requirements. In this case, the waterproof, breathable and sound-permeable membrane can improve the scanner’s ability to adapt to extreme environments.

In summary, waterproof, breathable and sound-permeable products can enhance the durability and reliability of the scanner in different environments, but it is necessary to choose the appropriate waterproof product based on the actual application scenarios and needs of the scanner. Breathable and sound-permeable solution. These products provide an extra layer of protection for scanners, helping to reduce maintenance costs and extend service life.

Related products of SST include: Adhesive Vent membrane , Speaker waterproof and breathable Sound membrane, Microphone waterproof sound-permeable membrane