Outdoor lighting fixtures face many challenges during the design and use process,such as rain, fog, dust, temperature changes and other natural factors. In order to solve these problems, waterproof and breathable products have emerged, which have an important impact on outdoor lighting. The following is the specific impact of waterproof and breathable products on outdoor lighting:

1. Waterproof performance: Waterproof and breathable products can effectively prevent moisture from entering the interior of the lamp and avoid short circuits caused by moisture. , corrosion and other failures. In outdoor environments, moisture such as rain and fog can cause damage to the internal circuits and metal parts of lamps, and waterproof and breathable products can ensure that lamps can work normally in humid environments.

2. Breathability: Outdoor lamps will generate heat during operation. Waterproof and breathable products can help the lamps to effectively Dissipate heat to prevent the internal temperature from being too high and ensure the stable operation of the lamp. At the same time, the breathability can also prevent condensation caused by excessive temperature differences inside the lamp.

3. Dust-proof performance: Waterproof and breathable products can prevent dust and fine particles from entering the interior of the lamp, protecting the internal circuit and The light source is protected from pollution and the service life of the lamp is extended.

4. Pressure balance: The internal air pressure of outdoor lamps may change under the influence of temperature changes and external environment. Waterproof and breathable products can balance the pressure difference between the inside and outside of the lamp and prevent damage to the lamp due to pressure changes.

5. High and low temperature resistance: Waterproof and breathable products can adapt to changes in high and low temperatures in the outdoor environment and will not Temperature fluctuations may affect the normal operation of lamps.

6. Corrosion resistance: Ultraviolet rays, salt spray, etc. in the outdoor environment will corrode the lamp materials. Waterproof and breathable products have good corrosion resistance and can ensure that the lamps can be used for a long time in harsh environments.

7. Easy to design and install: The design and installation process of waterproof and breathable products is simple, which can improve production efficiency and shorten the production time. New product launch time.

8. Reduce costs:By using waterproof and breathable products, outdoor lamps can reduce the need for other protective measures during the production process. Costs such as coatings, sealants, etc.

9. Improve reliability: Waterproof and breathable products can ensure that outdoor lighting fixtures can work normally under various extreme weather conditions. Improve the reliability of lamps.

10. Extend the service life:Because waterproof and breathable products can effectively protect lamps from the impact of the external environment, thereby extending extends the service life of the lamp.

In general,The impact of breathable products on outdoor lighting is mainly reflected in waterproof performance, gas diffusion, pollution protection and light transmittance. When selecting and using breathable products, you need to choose the appropriate breathable product based on the specific outdoor lighting type and environmental needs, and ensure that it can meet the needs of the lighting fixtures needs to improve the working effect and lifespan of outdoor lighting fixtures.

Related products of SST include: Snap Fit Vent Valve, Srew In Vent Valve ,Adhesive Vent membrane 

The impact of waterproof and breathable products on outdoor security monitoring equipment is multifaceted, mainly including the following aspects:

Waterproof: Outdoor security monitoring equipment is often exposed to bad weather, such as rain, snow, fog, etc., and is waterproof Breathable products ensure that equipment works properly when immersed in water or in humid environments, preventing moisture from damaging electronic components and circuits.

Breathability: Waterproof breathable products allow water vapor molecules to pass through but prevent liquid moisture from entering, which can help outdoor equipment Keeps the interior dry during temperature changes and prevents internal condensation.

Dust resistance:Dust and particles in outdoor environments may clog the device’s cooling holes and affect its normal operation. . Waterproof and breathable products can effectively prevent the entry of these particles and protect equipment from dust pollution.

Weather resistance: Outdoor equipment needs to be able to withstand various weather conditions, including UV rays, temperature differences, salt spray, etc. Waterproof and breathable products are usually weather-resistant and can ensure the normal operation of equipment in extreme climates.

Heat dissipation: Waterproof and breathable products help outdoor equipment dissipate heat, maintain the balance of the internal temperature of the equipment, and prevent overheating , thereby extending the service life of the equipment.

Sealability: Vents prevent moisture and dust from entering the seams and interfaces of equipment by providing sealing protection , to ensure the protective performance of the entire machine.

Reliability: Waterproof and breathable products improve the reliability of outdoor security monitoring equipment in harsh environments and reduce equipment failures. and downtime to ensure continuous operation of the monitoring system.

Maintenance: With the use of waterproof and breathable products, outdoor equipment requires less maintenance because they are resistant to the outside world Environmental impact, reducing breakdowns and damage.

Pressure resistance:Waterproof and breathable products can withstand a certain amount of water pressure, ensuring the safety of equipment under a certain water depth and pressure. normal operation.

Cost-Effectiveness:While waterproof and breathable products may add to the initial cost of the device, they provide long-term protection and Performance is guaranteed, thereby reducing overall life cycle costs.

In general, the impact of breathable products on security monitoring equipment is mainly reflected in waterproof performance, gas diffusion, pollution protection and signal transmission. When selecting and using breathable products, it is necessary to select appropriate breathable products based on the specific type of security monitoring equipment and environmental requirements, and ensure that they can meet the needs of the equipment and improve the working effect and life of the equipment.

Related products of SST include: Snap Fit Vent Valve, Srew In Vent Valve ,Adhesive Vent membrane 

The impact of waterproof and breathable products on communication base station equipment is mainly reflected in the following aspects:

Waterproof: Communication base station equipment usually needs to resist rain, splashing water and other moisture intrusions. Waterproof and breathable products can provide Effective protection to prevent moisture from causing circuit short circuit or equipment damage.

Breathability: The equipment will generate heat during operation. Waterproof and breathable products can help dissipate this heat and prevent the equipment from overheating to ensure normal operation of the equipment.

Dust resistance:Dust and particles in outdoor environments may clog the device’s cooling holes and affect its normal operation. . Waterproof and breathable products can effectively prevent the entry of these particles and protect equipment from dust pollution.

Weather resistance: Communication base station equipment needs to be able to withstand various climatic conditions, including ultraviolet rays, temperature differences, salt spray, etc. Waterproof and breathable products are usually weather-resistant and can ensure the normal operation of equipment in extreme climates.

Sealing: Waterproof and breathable products can provide good sealing performance to prevent moisture and dust from entering the seams and joints of the equipment. interface to ensure the protective performance of the entire machine.

Balance pressure: In some designs, waterproof and breathable products can help balance internal and external pressure to prevent equipment is damaged.

Reliability: Waterproof and breathable products improve the reliability of communication base station equipment in harsh environments and reduce equipment failures and downtime to ensure the continuous operation of the communication system.

Maintainability: Due to the use of waterproof and breathable products, the maintenance workload of communication base stations is reduced because they are resistant to the outside world Environmental impact, reducing breakdowns and damage.

Pressure resistance:Waterproof and breathable products can withstand a certain amount of water pressure, ensuring the safety of equipment under a certain water depth and pressure. normal operation.

Cost-Effectiveness:While waterproof and breathable products may add to the initial cost of the device, they provide long-term protection and Performance is guaranteed, thereby reducing overall life cycle costs.

In summary, waterproof and breathable products are crucial to the performance and reliability of communication base station equipment in outdoor environments. They ensure that the equipment can operate stably in various environments, thereby ensuring The stability and reliability of communication networks.

Related products of SST include: Srew In Vent Valve ,Adhesive Vent membrane 

The application of waterproof and breathable products in photovoltaic inverters is mainly to improve the weather resistance and reliability of the equipment and ensure the normal operation of the inverter in harsh outdoor environments. The following are some potential impacts of waterproof and breathable products on photovoltaic inverters:
Improved protective performance: Waterproof and breathable products can prevent moisture, dust and other pollutants from entering the inside of the inverter, protecting Internal electronic components and circuit boards are protected from damage.
Heat management: Photovoltaic inverters generate heat during operation, and waterproof and breathable products help dissipate heat , keep the internal temperature of the inverter appropriate and extend the life of the equipment.
Improved durability: By providing waterproof and breathable protection, the inverter can better resist environmental factors, such as rain , humidity, salt spray, etc., thereby improving its durability for outdoor use.
Enhanced safety: Waterproof and breathable products can prevent moisture from entering the inside of the inverter, reducing the risk of electrical short circuits and failures , improve overall security.
Ease of maintenance:Waterproof and breathable products should be designed to facilitate maintenance and inspection, ensuring that they can be quickly and easily repaired when needed. Make repairs.
Environmental adaptability: Waterproof and breathable products enable photovoltaic inverters to adapt to more environmental conditions, such as deserts, Plateau, coastal areas, etc., expanding its application scope.
In general, waterproof and breathable products have a positive impact on photovoltaic inverters. They improve the durability, safety and environmental adaptability of the inverter, ensuring that the inverter Normal operation under various environmental conditions. When designing and using photovoltaic inverters, the selection and application of waterproof and breathable products should be taken into consideration to ensure the efficient and safe operation of the inverter.

Related products of SST include: Explosion-proof valve, Snap Fit Vent Valve, Srew In Vent Valve

The impact of breathable products on small household appliances mainly includes the following aspects:

1. Heat dissipation performance:Some small household appliances will generate a certain amount of heat during use, such as induction cookers, Hair dryer etc. Breathable products can help promote gas exchange inside and outside the device, improve heat dissipation, and prevent the device from overheating and causing performance degradation or damage.
2. Dust-proof and waterproof: Breathable products can effectively prevent dust, particles and other impurities from entering the interior of small household appliances. Reduce contamination and damage to electronic components. At the same time, breathable products can also provide a certain degree of waterproof protection to prevent liquids from entering the equipment and causing short circuits or damage.
3. Humidity balance: Breathable products can achieve a balance of moisture inside and outside the equipment and prevent moisture from being trapped inside the equipment. The buildup can cause circuit shorts or corrode components. Breathable products can allow moisture inside the device to escape while preventing external moisture from entering the device and maintaining a suitable humidity environment.
4. Noise control:Some breathable products have noise reduction functions, which can effectively reduce the noise generated by small household appliances , improve the user experience.

In general, the impact of breathable products on small household appliances is mainly reflected in heat dissipation performance, dustproof and waterproof, humidity balance and noise control. Choosing the right breathable products can improve the reliability and stability of the device, extend the life of the device, and improve the user experience.

Related products of SST include: Adhesive Vent membrane ,

Acoustic vent membrane

The impact of waterproof and breathable products on outdoor electronic sensors is significant, especially in applications in outdoor environments. Here are a few key points:

Waterproof protection: The outdoor environment is changeable, and electronic sensors may encounter rain, splashing water, etc. Waterproof and breathable products can protect the sensor from moisture intrusion, thereby avoiding short circuit, corrosion and other damage and ensuring the stable operation of the sensor.

Breathability: The sensor may generate heat during operation. Waterproof and breathable products can allow heat to pass through and keep the sensor Internal temperature balance prevents overheating. At the same time, it can also eliminate condensation caused by environmental humidity and protect the sensor from damage.

Dust protection: Dust, fine particles, etc. in the outdoor environment will affect the performance of the sensor. Waterproof and breathable products can effectively block these particles, protect the sensitive components of the sensor, and ensure its normal operation.

UV and chemical stability: Outdoor sensors may be exposed to strong sunlight, and waterproof and breathable products need to be Good UV resistance to prevent material aging. In addition, it also needs to have certain chemical stability to cope with chemical corrosion in outdoor environments.

Balance Pressure: In certain situations, such as when temperature changes cause internal pressure to build up, waterproof breathable products can help Balance internal and external pressure to prevent damage to the sensor due to excessive pressure.

To sum up, waterproof and breathable products can improve the protective performance of outdoor electronic sensors, extend their service life, and ensure their stable operation in various environments. This is of great significance for improving the safety and reliability of outdoor electronic equipment.

Related products of SST include: Snap Fit Vent Valve, Srew In Vent Valve ,Adhesive Vent membrane 

The impact of waterproof and breathable products on smart electric bicycles is mainly reflected in the following aspects:

Battery protection:The battery of a smart electric bicycle is the core component. Waterproof and breathable products can protect the battery from moisture and dust. damage, extending the service life of the battery while ensuring that the battery can operate safely in various weather conditions.

Circuit board protection: Smart electric bicycles contain many electronic components and circuit boards. Waterproof and breathable products can effectively prevent Moisture and particulate matter enter, protecting electronic components from damage and improving the stability and durability of the vehicle.

Sensor durability:Smart electric bicycles rely on various sensors to provide driving information, such as speed sensors, acceleration sensors wait. Waterproof and breathable products can increase the durability of these sensors and ensure that they can still operate accurately in harsh environments.

Improved dustproof and waterproof level:By using waterproof and breathable products, the dustproof and waterproof level of smart electric bicycles can be improved , making it adaptable to more usage environments, such as rainy days, snowy days, etc.

User experience improvement: Waterproof and breathable products can reduce equipment failures caused by moisture intrusion and improve user experience. Reduce the inconvenience caused by equipment failure.

Safety enhancement: The safety of smart electric bicycles is very important. Waterproof and breathable products can reduce the risk of equipment failure. Safety risks, such as battery short circuit, sensor misjudgment, etc.

In summary, waterproof and breathable products have a positive impact on the performance, durability, safety and user experience of smart electric bicycles, and help improve the performance of smart electric bicycles in outdoor environments. Adaptability and market competitiveness.

Related products of SST include: Adhesive Vent membrane ,

Acoustic vent membrane